| 16338001 Kaydon Slewing Ring Bearings | P60°:60.5 kN; P90°:36 kN; J min.:244.475 mm; Pa:6.49 kN; H1:88.9 mm; Stabilizing ring:2 x SR-1613; Ca:57.785 mm; Da:140 mm; da:57.15 mm; Labyrinth ring:2 x LOR 33; ba:32.544 mm; J max.:279.4 mm; J1:53.975 mm; A1:88.9 mm; L:330.2 mm; Appropriate attachment bolt size G:0.625 in; P150°:19.6 kN; Cap bolt:2 x 5/8-11 UNC; RG:3/8 NPT; Cap bolt recommended tightening torque:298.3 N·m; |
| 10-20 0311/0-32002 IMO Slewing Ring Bearings | Calculation factor f1:0.99; Static axial stiffness, preload class B:329 N/µm; rb max.:1 mm; Preload class A GA:300 N; D:140 mm; Preload class C GC:1840 N; Static axial stiffness, preload class C:432 N/µm; Calculation factor f2C:1.06; Basic dynamic load rating C:33.8 kN; Calculation factor f2B:1.03; Calculation factor e:0.68; d:90 mm; Attainable speed for grease lubrication:14000 r/min; |
| 10-25 1455/0-0307 IMO Slewing Ring Bearings | B1:3 mm; Tolerance housing:H7; B:20 mm; d:14 mm; Coefficient of friction µ min.:0.05; Mass bushing:0.026 kg; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; D:20 mm; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; D1:26 mm; Permissible sliding velocity v min.:0.25 m/s; |
| MTO-415 Kaydon Slewing Ring Bearings | da:100 mm; R2:30.163 mm; Cap bolt recommended tightening torque:298.3 N·m; H:222.25 mm; h:42.069 mm; dc:96.838 mm; J max.:333.375 mm; db:114.3 mm; A1:111.125 mm; P150°:48 kN; PG:1/4 NPT; Stabilizing ring:SR-20-17; N1:26.988 mm; ba:44.45 mm; Cap bolt, SAE grade:8; J min.:295.275 mm; Pa:36.9 kN; A2:224.631 mm; P90°:84.5 kN; End plug (suffix Y):EPR 12; |
| 11-20 1091/1-32172 IMO Slewing Ring Bearings | B:400.842 mm; Calculation factor Y2:2.9; D1 ≈:800 mm; Calculation factor Y1:1.9; D:855 mm; r1,2 min.:4 mm; Basic dynamic load rating C:6270 kN; Calculation factor e:0.35; Fatigue load limit Pu:1220 kN; Mass bearing:490 kg; Calculation factor Y0:1.8; T:318.48 mm; Thrust factor K:1.66; Comparative axial load rating CFa:280 kN; Design variant/feature:TQOES/GWISI; d1 ≈:707 mm; r3,4 min.:5 mm; |
| 77295A Franke Slewing Ring Bearings | Stabilizing ring:SR-26-0; End plug (suffix Y):EPR 15; Cap bolt:3/4-10 UNC; P120°:125 kN; P180°:151 kN; Eye bolt:2 x 3/8-16 UNC; Labyrinth ring:2 x LOR 115; PG:1/4 NPT; Ca:73.812 mm; P90°:185 kN; L:466.725 mm; H2:60.325 mm; R1:79.375 mm; Initial grease fill:382.73 g; ba:57.944 mm; P60°:308 kN; P150°:118 kN; PosiTrac Plus contact element:2 x B10724-117; A1:130.175 mm; RG:1/2 NPT; |
| 77293A Franke Slewing Ring Bearings | K:3 mm; d1:70 mm; d2 ≈:106 mm; Mass bearing + sleeve:5.3 kg; Fatigue load limit Pu:39 kN; D:170 mm; B:39 mm; Da max.:158 mm; Reference speed:3800 r/min; B4:17 mm; r1,2 min.:2.1 mm; Ba min.:6 mm; Basic dynamic load rating C:331 kN; Calculation factor e:0.24; db min.:85 mm; Calculation factor Y0:2.8; da max.:106 mm; B1:59 mm; d3:105 mm; b:6 mm; |
| 68795A Franke Slewing Ring Bearings | B1:89 mm; Reference speed:2400 r/min; d1:170 mm; Calculation factor e:0.16; Ba min.:10 mm; B:52 mm; b:6 mm; Mass bearing + sleeve:14.5 kg; Calculation factor Y0:4; Calculation factor Y2:6.3; db min.:198 mm; Da max.:251 mm; Fatigue load limit Pu:76.5 kN; Basic dynamic load rating C:499 kN; d3:220 mm; r1,2 min.:2 mm; ra max.:2 mm; Basic static load rating C0:800 kN; K:3 mm; B4:30.5 mm; |
| 77278A Franke Slewing Ring Bearings | PG:1/8 NPT; J max.:295.275 mm; P120°:38.3 kN; A2:149.225 mm; Cap bolt recommended tightening torque:149.1 N·m; P150°:34.7 kN; R1:60.325 mm; Appropriate attachment bolt size G:0.625 in; Labyrinth ring:2 x LOR 187; A1:98.425 mm; N1:19.05 mm; J min.:263.525 mm; H:192.484 mm; P60°:101 kN; R2:27.781 mm; h:38.1 mm; J1:53.975 mm; da:79.375 mm; Initial grease fill:286.33 g; End plug (suffix Y):EPR 11; |
| 92-20 0311/1-37202 IMO Slewing Ring Bearings | with tapered bore:900 min-1; Grease:4750 kN; Dynamic (Cr):12 mm; with cylindrical bore:700 min-1; Static (Cor):22.3 mm; B:133 mm; Pu:2680 kN; rs (min):5 mm; D:520 mm; d:340 mm; Oil:373.970 kN; |
| 77315A Franke Slewing Ring Bearings | Labyrinth ring (dc shaft position):LOR 46; P60°:54.3 kN; J1:47.625 mm; H2:28.575 mm; db:87.313 mm; P120°:20 kN; End plug (suffix Y):EPR 8; P150°:18.2 kN; Stabilizing ring:2 x SR-15-0; Appropriate attachment bolt size G:0.5 in; P90°:32.5 kN; R1:46.038 mm; h:31.75 mm; P180°:22.2 kN; Pa:14.2 kN; A2:118.666 mm; J max.:244.475 mm; dc:71.438 mm; Cap bolt, SAE grade:5; L:285.75 mm; |
| 11-25 0555/1-0412 IMO Slewing Ring Bearings | Basic Static Radial Load Rating Co:12900 N; B:16.00 mm; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:13000 rpm; D:62.0000 mm; Grease Speed Rating n1:10000 rpm; d:30.000 mm; Basic Dynamic Radial Load Rating C:19000 N; Fillet Radius ra:1.00 mm; |
| MTO-122 Kaydon Slewing Ring Bearings | Basic static load rating C0:3400 kN; Specific dynamic load factor K:100 N/mm²; D:177.8 mm; Basic dynamic load rating C:1120 kN; d:114.3 mm; da max.:130.5 mm; Specific static load factor K0:300 N/mm²; C:85.725 mm; b:11 mm; r2 min.:1.1 mm; Da max.:171 mm; r1 min.:1 mm; B:100 mm; Da min.:157 mm; ra max.:1 mm; b1:10 mm; Design (sliding contact surface combination):Steel/steel; Lubricant:Regular relubricatio; |
| 77320A Franke Slewing Ring Bearings | Sealed Speed Rating n3:52000 rpm; D:9.5000 mm; Accessories:Two Shields; d:3.200 mm; Fillet Radius ra:0.30 mm; Width Plain B:4.0 mm; Oil Speed Rating Open/Shielded n2:91000 rpm; Grease Speed Rating Open/Shielded n1:75000 rpm; Basic Static Radial Load Rating Co:120 N; Shielded or Sealed B1:4.0 mm; Basic Dynamic Radial Load Rating C:312 N; |
| MTE-145X Kaydon Slewing Ring Bearings | Grease Speed Rating n1:2700 rpm; D:240.0000 mm; Oil Speed Rating n2:3500 rpm; Basic Static Radial Load Rating Co:236000 N; d:110.000 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:229000 N; Fillet Radius rb:1.00 mm; B:50.00 mm; |
| 16319001 Kaydon Slewing Ring Bearings | R2:36.513 mm; Adapter sleeve assembly:SNW 122x3.11/16; R1:79.375 mm; A1:133.35 mm; H1:152.4 mm; Initial grease fill:382.73 g; P60°:189 kN; Cap bolt recommended tightening torque:1220 N·m; PG:1/4 NPT; da:93.662 mm; Taconite seal:TER 557; P150°:68.1 kN; End plug (suffix Y):EPR 13; J1:82.55 mm; ba:63.5 mm; N1:25.4 mm; Housing:SAF 622; H2:60.325 mm; Stabilizing ring:SR-0-22; Cap bolt:2 x 1-8 UNC; |